Vehicle marking tape

The marking strip is a device to be applied to professional vehicles that intervene on the roads on a regular and repeated occasion. This equipment of marking for vehicle is generally used by the services of work, road rescue or the municipal services with frequent stops on the roads.

Introduction of the marking strip for intervention vehicle.

This equipment of marking makes it possible to announce the presence of professionals near the ways. This beaconing band for vehicle is affixed thanks to an adhesive or magnetic system according to your needs and your selection.

The position of this band on your light intervention vehicle is regulated by the French  decree of 07/04/2006, modifying the decree 20/01/1987, relating to the complementary signalling of the vehicles of urgent intervention and the vehicles with slow progression:

• A strip on each side of your vehicle with a minimum surface of 0.16m²;
• At the front : 2 horizontal stripes for a minimum surface of 0.16 m² ;
• At the rear: 2 vertical stripes and 2 horizontal stripes for a total surface of 0.32m² minimum;

These bands to be put on your vehicle of intervention, are easy to place and to affix on each part of your vehicle.

Technical characteristics of the beaconing band for intervention vehicle

This signage and beaconing band for professionals is available on different supports, different retroreflective films and various screen prints.

The multiple technical characteristics are as follows:

• The dimensions are 50 cm long and 15 cm wide;
• The support of this banner can be adhesive or magnetic;
• The thickness for the adhesive band is 150 microns or 1.65 mm for the magnetic version;
• A silk-screen print in the center of the banner, with a choice of "SERVICE", "WORK" or "FREQUENT STOPS";
• A retro-reflective film of class A microbeads or class B microbeads or microprisms depending on your needs and the message on the banner;
• Each banner has White/Red chevrons oriented towards the outside of the vehicle, starting from the central axis of the banner;

Advantages of the intervention vehicle lighting strip

This marking and signalling device for vehicles has many advantages, making it indispensable for a large number of professionals who intervene on the roads.

The latter, depending on the class of the retro-reflective film, class A or class B, allows visibility over long distances, 80 meters for the class A film and about 250 meters for the class B Microbeads or Microprisms film.

The use of this equipment must be done on vehicles on roads with a speed limit between 50 km/h and 90km/h, in order to ensure the visibility of the device and the message for the other road users.

The adhesive version of this vehicle marking strip can be easily applied to any type of vehicle surface. The magnetic version, on the other hand, is affixed to a flat surface for a better hold of the device.

Find our various devices of beaconing and luminous signalling for intervention vehicles in our dedicated section by clicking here, in order to complete at best your professional intervention device.